The Hermesys Wire Mesh Cable Tray is a second-generation, open-type cable management system. It works well both indoors and outdoors, so it suits telecom rooms, data centers, and engineering projects. The range comes in two profiles: U-Type, which is open channel, and G-Type, which is fully enclosed and self-supporting. Both types are available in a range of heights, widths, and wire diameters. In addition, they are made from carbon steel or stainless steel, with a choice of surface finishes. The system can run from the rack to the wall, ceiling, or floor as one connected line. It also comes with matching splicing and mounting hardware.
Key Features and Benefits
- U-Type open-channel trays span 30, 50, 100, or 150 mm heights, with widths from 50 mm to 600 mm.
- This open design gives strong ventilation and easy access to cables at mid-span.
- G-Type fully enclosed trays come in 50 mm and 100 mm heights.
- They mount directly to a ceiling or wall, with no separate support brackets needed, which suits complex cable pathways.
- Wire diameters of 4 mm, 5 mm, or 6 mm match different load needs.
- Trays are built from carbon steel (Q235B) or stainless steel (304/316L).
- Indoor trays use EZ electrozinc plating, while outdoor trays use HDG hot-dip galvanizing.
- PC powder coating comes in custom colors, and stainless steel gets an acid-washed, passivated finish.
- Standard 3000 mm (10 ft) section lengths allow fast, low-waste setup.
- A full splicing hardware line covers straight, tee, cross, and curved joins.
- This includes coupler kits, strengthening bar kits, fast locking connectors, snap clamps, and L-connector kits.
- It also includes bend quick clamps, radius shields, and link span kits.
- Wall-mounting brackets — T-bracket, triangle bracket, spider bracket, and wall mounting bracket — have arm lengths matched to tray width.
- Ceiling-mounting hardware, including T-suspension bar, C-channel strut, 50 hanger, hanging clip, and pendant drop, suits threaded-rod or hook suspension.
- Underfloor and raised-floor mounting hardware, such as stand brackets, bridge stand bracket kit, U-pillar, and spider bracket, suits ground-level runs.
- On-site fabrication needs no tools and no welding, just a bolt cutter and standard splice hardware.
- This covers tees, Y-junctions, 90° bends, corner junctions, sweeps, and width reductions, across widths from 100 mm to 600 mm.
- Dividers, covers, end caps, and cable exit clips suit enclosed or divided cable runs.
Typical Applications
- Telecom Equipment Rooms
- Data Centers
- Transmission Centers
- Structured Cabling Systems (Indoor and Outdoor)
- Raised-Floor and Ceiling Cable Routing in Commercial and Industrial Buildings
Reference Standard
Wire Mesh Cable Tray — Product Line Overview
Brief Introduction
Second-generation open-type wire mesh cable tray for indoor and outdoor use; carbon steel (Q235B) or stainless steel (304 / 316L); surface treatments include EZ electrozinc plating (indoor), HDG hot-dip galvanizing (outdoor), PC powder coating (custom colors), and acid-washed/passivated finishes for stainless steel.
U-Wire Tray Straight Section
Heights of 30 / 50 / 100 / 150 mm; widths from 50-600 mm (varies by height); wire diameters of 4 / 5 / 6 mm; standard 3000 mm length; safe working load (SWL) tested to IEC 61537 Test Model II; available in 5 finishes (EZ / HDG / PC / 304 / 316L).
G-Wire Tray Straight Section
Heights of 50 / 100 mm; widths of 50 / 100 mm; wire diameters of 4 / 5 / 6 mm; fully enclosed profile that mounts directly to ceiling or wall without separate support brackets, suited to complex cable pathways.
Splicing
Straight-section joining and curved-connection hardware: Coupler Kit, Strengthening Bar Kit, Fast Locking Connector, L Connector Kit, Snap Clamp, Bend Quick Clamp, Radius Shield, Axis Coupler Kit, R140 / R300 Link Span Kit.
Wall Mounting
Wall-mounted brackets: Wall T-Bracket (stackable for multi-tier bridges), Triangle Bracket (adjustable screw position), Spider Bracket (needs only 100 mm installation space), Wall Mounting Bracket (for narrow, lighter-load trays); bracket length matched to tray width.
Ceiling Mounting
Ceiling-suspension hardware: T-Suspension Bar, C-Channel Strut, 50 Hanger (50 mm wide trays only), Hanging Clip (fits M6 / M8 / M10 threaded rod, up to 300 mm wide trays), Axis Coupler (with PVC sockets), Pendant Drop (adjustable height).
Underfloor Mounting
Ground and raised-floor mounting hardware: 50 Stand Bracket (50 mm wide trays only), Stand T-Bracket, Bridge Stand Bracket Kit (fits W100-600 mm trays), U-Pillar, Spider Bracket.
Other
Additional accessories: Pipeline Fixing Plate (1 / 2 / 3-hole, custom holes available), Cable Exit Clip (W45 / W90), Wire Mesh Cable Tray Divider, Wire Mesh Cable Tray Cover, End Cap, Waterfall (vertical transition fitting), Bolt Cutter (dedicated tool).
Fabrications
Tool-free, no-weld on-site fabrication: T-junctions, Y-junctions, 90° bends, 90° corner junctions, sweeps (large-radius bends), and reductions (width transitions); covers tray widths from 100-600 mm using only a bolt cutter and standard splice hardware.
Technical Data
Material
EZ / PC / 304 / 316L
Wire Diameter
4 / 5 / 6 mm
Type U – Height (mm)
Width Options (mm)
50
50 / 100 / 150 / 200 / 300 / 400 / 500 / 600
100
100 / 150 / 200 / 300 / 400 / 500 / 600
150
300 / 400 / 500 / 600
Type G – Height (mm)
Width Options (mm)
