The Hermesys GryphonX™ 5/3.5mm HDPE Microduct is an air-blown microduct built for urban outdoor networks and long-haul telecom projects. Its high-density PE construction protects the air-blown cable inside. A permanent inner silicone layer keeps friction low, so cable can be blown further and faster.
Key Features and Benefits
- Bundle configurations from 2 to 24+1 ways let one duct product scale from small drops to large distribution bundles.
- Permanent inner silicone layer keeps friction low, which supports long, fast cable-blowing runs into the microduct.
- High-density PE sheath gives the duct mechanical protection against installation and in-ground stresses.
- Five microduct sheath colours (red, green, yellow, blue, beige) support colour-coded duct identification within a bundle.
- Tensile strength of 20-30 N/mm² and elongation at break above 400% give the duct durability during pulling and bending.
- Un-armoured, lightweight bundled sheath keeps the assembly easy to handle and install.
- Optional stripe colour and count on the bundled duct support project-specific duct identification schemes.
Typical Applications
- Urban Outdoor Telecom Networks
- Long-Haul Telecom Duct Routes
- Air-Blown Fibre (ABF) Microduct Systems
- FTTx (Fibre to the x) Network Infrastructure
Reference Standard
- ASTM D2122
- IEC 60794-1-2
- ASTM F2160
- ASTM D638 (Type IV)
- ASTM D1693
- ISO 2505
