| Fiber Type | G657A2 | Min. Bend Radius | 20/10D (Dynamic/Static) |
| Strength Member | FRP | Fiber Count | 24/48/72/96/144 Core |
| Fiber Module Material | LSOH | Ứng dụng | FTTX |
| Outer Sheath | Black LSOH | Min. tensile strength | 200N |
| Max. tensile strength | 400N | Installation Temperature | -10°C～+50°C |
| Operation Temperature | -30°C～+60°C | Storage Temperature | -40°C～+60°C |
| Water Penetration Under the temperature of 20±5℃ (Cable Length: 3M, Water Height: 1M
Duration：24H |
No water is leaking out from the fiber module | Crush Short term/Long term N/100mm | 1000/300 |
| Fiber Count | 24 | 48 | 96 | 120 | 144 |
| O.D. (Nom.) | 8.6mm | 10.6mm | 12.1mm | 14.1mm | 14.1mm |
| Approx. Weight (kg/km) | 85 | 90 | 110 | 125 | 125 |
| Fiber in Module | 2 | 2 | 4 | 6 | 6 |
| No. of Fiber Modules | 12 | 24 | 24 | 20 | 24 |
1. High-Rise Buildings & Vertical Wiring (FTTH / MDUs)
You can open a window on the outer sheath and directly pull out a subunit (up to 40 meters) as a branch cable. There is no need to cut the main cable or perform splicing on every floor, significantly reducing installation time and labor costs in vertical shafts.
2. Last-Mile Access & Micro Data Centers
The Fully Dry structure means no messy waterproof gel (jelly) to clean off, saving preparation time and speeding up deployment and termination.
3. Telecom Operators & Contractors Seeking Fast, Low-Maintenance Installation
It reduces the number of splice closures needed, eliminating potential failure points and improving overall network reliability.
1. Long-Distance Trunk Line Transmission or High-Tension Pulling
Designed specifically for local distribution and branching, its pulling strength and structural protection are not meant for long-haul backbone lines.
2. Simple Point-to-Point Links (Without Branching Needs)
If you do not need to extract subunits mid-span, standard outdoor cables or indoor tight-buffered cables are much more cost-effective.
3. Extreme Direct-Burial Environments or Severe Mechanical Impact
While suitable for underground ducts in last-mile networks, unarmored cables in direct-burial environments without conduit protection still require heavy-duty double-jacket armored cables.
1. Submit Requirements: Send your detailed specifications to our Sales team via WhatsApp (+65 9833 9388).
2. Feasibility Evaluation: Our factory will assess technical feasibility based on your request.
3. Cable Design: We will design a customized cable structure tailored to your needs.
We offer technical support for both standard and customized cables. Warranty terms and specific technical support details for custom orders will be finalized after evaluation.
Depending on the product type, our factories are located in Mainland China, Taiwan, Thailand, Vietnam, and Malaysia.
We support flexible trade terms, including FOB, CIF, and DDP, via sea, air, or express freight. We can arrange delivery according to your project requirements or work with your designated freight forwarder.
